Akut ja Paristot
RADIOPUHELIMET LA/CB 27
RADIOPUHELIMET VHF ja UHF
+ Jännitteen alentimet
Liittimet ja adapterit
Megafonit ja kuulutus
SALES IN ENGLISH
ICOM IC-R8600 PRO VASTAANOTIN
10kHz to 3GHz Super Wideband Coverage
The IC-R8600 decodes various digital protocol signals including P25 (Phase 1), NXDN, dPMR, D-STAR, Japanese DCR (Digital Convenience Radio) as well as receives conventional analog signals such as USB, LSB, FSK, CW, AM, S-AM (Synchronous-AM), FM and WFM modes, covering 10kHz to 3GHz wideband in 1Hz steps.
Software Demodulation in FPGA Processing
The IC-R8600 utilizes FPGA (Field Programmable Gate Array) and DSP units
for demodulation, decoding and most of signal processing. Direct HF signals and
intermediate frequency signals, which are converted from VHF/UHF signals, are
digitized in a 14-bit A/D converter and transferred to the FPGA and DSP
for optimal processing. The high-rate 122.88MHz sampling frequency used for the A/D
converter results in superior aliasing and image reception reduction.
Superb Receiver Performance
The IC-R8600 has 11 discrete RF bandpass filters in the HF bands and 13 bandpass
filters in the VHF/UHF bands. To prevent overflow, only the intended signal is passed
, while any out of range strong interference signals are rejected. IC-
R8600 provides +30dBm IP3 and 105dB dynamic range at 14.1MHz. IP3 performance is
+10dBm at 144MHz and 0dBm at 440MHz.
Ample Memory Channels
The IC-R8600 has up to 2000 regular memory channels assignable to 100 groups.
In addition to the regular memory channels, up to 100 scan skip channels and 50
pairs of program scan edges can be set. The auto memory write scan
automatically stores busy frequencies in the auto memory write channels (up to 200 channels).
These memory channels and various settings can be edited with the optional CS-R8600 programming software on a Windows® PC.
Variety of Scan Functions
A variety of scan functions effectively and thoroughly search for desired
stations. The IC-R8600 scans up to 100 channels per second in the memory scan mode.
Quick, Smooth and Intuitive Operation
To efficiently acquire intended signals, The IC-R8600 user interface provides
quick and accurate operation. The large 4.3-inch color display, with touch screen
function is configured to collect operating information. By tapping
indications and icons on the screen, the setting menu will pop up and parameters
can easily be adjusted. When either the DIAL A, B or C multi-function control
knobs is pushed, various functions, such as scan speed, RF gain, audio tone,
display backlight or other menus will pop up on the display.
Real-time Spectrum Scope with Waterfall Function
The high-resolution real-time spectrum scope provides class-leading performance
in resolution, maximum 30 frames per second* fast sweep speed, ±2.5MHz wide
scope span (display range) and 110dB of dynamic range (at ±2.5kHz span)
The waterfall screen allows you to find weak signals by showing the spectrum
change over time. When tapping the spectrum scope or waterfall screen,
the tapped area can be selected as the operating frequency. The peak search
function finds several peak frequencies within the scope range, and helps you
to select these. (* Approximate)
SD Card Slot for Receiver Recorder
The recorder function can record received audio onto an SD card in WAVE format.
The recorded voice audio can be played back on the receiver or a PC.
When a 32GB SD card is used, up to 270 hours of recording is possible.
n addition, the screen capture function saves a snap shot of the screen in PNG
or BMP format on the SD card.
* An SD card is required separately
Remote Control Function through IP Network or USB Cable
The optional RS-R8600 PC remote control software allows you to listen to received audio
and control most of the receiver functions ,including
the spectrum scope, through an IP network or USB cable.
I/Q Signal Output
The I/Q signal output function* enables you to derive digital IF signals
from the I/Q output port to a PC through a USB cable. It can be used for analyzing spectrum or decoding signals.
* This feature will be provided with a future firmware update.
Third-part software may be required separately.